IMIS IoT Pilot
For more information please contact innovation@ogc.org
The Open Geospatial Consortium (OGC®) announced the successful completion of the OGC Incident Management Information Sharing Internet of Things Pilot Project (IMIS IoT Pilot) on 8 March 2016. The IMIS IoT Pilot was sponsored by the U.S. Department of Homeland Security (DHS) Science and Technology Directorate (S&T) and the IJIS Institute. The project was launched on 22 April 2015 with the public release of the Call for Participation to demonstrate open system sensor integration for emergency and disaster response. The OGC reviewed and selected participants from a set of industry-submitted proposals and conducted a project Kickoff on 9-10 July 2015.
Rapid integration of information from diverse information sources such as IoT sensors plays a key role in responding to emergencies and disasters. The number of these sources grows rapidly with the growing number of cell phones and other mobile devices and also with the growing number of different types of IoT sensors that are included in those devices, or that are attached to other kinds of equipment or mounted at fixed locations. Cameras and health and environment sensors on IoT devices mounted on or in equipment worn or carried by first responders and on their vehicles, including UAVs, have particular value in emergency and disaster scenarios. Data from a sensor has little or no value without context information. For example: A videocam shows a firefighter approaching a burning vehicle. Who is that firefighter? What assets and risks are nearby? Context information requires IoT data integration.
The value of all these information sources depends on the ability of incident responders’ applications to detect their existence, know their state, locations, descriptions, software interfaces and access rules, and to integrate the information coming from the sources. The IMIS IoT Pilot demonstrated how all of this is possible today. The pilot was designed to apply, test and demonstrate, in real world applications, Standards Based Commercial Off-The-Shelf (SCOTS) products that already implement or will soon implement existing OGC standards and related open standards from other standards organizations.
A real-world scenario for the Pilot was created in collaboration with first responders. The scenario depicts an incident in which fire, law enforcement, and emergency medical units must deploy, discover and integrate diverse sensors and platforms to gain situational awareness. Use cases in the scenario reveal specific interoperability requirements.
The IMIS IoT Pilot produced initial specifications, profiles, best practices and demonstration designs for connecting sensors and response information systems in an ad hoc fashion for management of such incidents as depicted in the architecture diagram that follows.
Figure: The OGC IMIS IoT Pilot demonstrated how information from diverse mobile, wearable and in situ sensors can be integrated in an ad hoc fashion through products’ implementations of currently available open interface and encoding standards.
The results of the Pilot has been documented in these OGC Engineering Reports:
- IMIS IoT Architecture Engineering Report: Describes the overall architecture of the systems developed and deployed during the IoT Pilot, analyzes lessons learned, and summarizes overall technical results of the project. (OGC report 16-014r2) This report is available through DHS
- Recommendations for Protocol Mapping IoT Devices to SWE Engineering Report: Describes details of solutions for mapping and routing IoT protocols to Sensor Web Enablement (SWE) interfaces and payloads developed and tested during the Pilot. Recommends practices for design of sensor hub (S-Hub) components that provide a SWE-compatible Internet presence for locally connected IoT devices. (OGC report 16-093r1) This report is available through DHS
- IMIS Profile Recommendations for OGC Web Services Engineering Report: Provides recommendations for changes to, or profiles of, existing standards as well as other recommended practices and/or application schemas developed or realized during the Pilot. (OGC 15-118r1) This report is available through DHS
The sponsors and the OGC thank the technology providers shown below that participated in the IMIS IoT Pilot and produced the reports.52°North Initiative for Geospatial Open Source Software GmbH, Münster, Germany
- Botts Innovative Research, Huntsville, Alabama, United States
- Compusult Limited, Mount Pearl, Newfoundland, Canada
- Envitia Limited, Horsham, West Sussex, United Kingdom
- Exemplar City / GeoHuntsville, Huntsville, Alabama, United States
- Noblis, Falls Church, Virginia, United States
- Northrop Grumman, Falls Church, Virginia, United States
- SensorUp, Calgary, Alberta, Canada
- University of Melbourne – Centre for Disaster Management and Public Safety (CDMPS), Melbourne, Australia
